ElectromagneticGate Locks - Magnetic Bond Sensor Standard
IDC’s Gate EMLock®provides 1200lbs of holding force and enables the accessand egress control of pedestrian and vehicle gates. Accesscontrols such as card readers, digital keypads and remote control stations provide gate and lock control.
Gate EMLocks arecompatible with manual and automatic, swinging and sliding, tubular and iron gates. The floating armature design compensates for gate misalignment with the electromagnet.
Weatherized
IDC Gate EMLocks are totally sealed in an epoxy filled stainless steel case.
A threaded conduit fitting ensures weather resistant protection of the wiring.
Application
With no moving parts to bind or wear, the Gate EMLock® is inherently failsafe and will unlock automatically during a power outage.
For security applications, the IDC 600 series power supplies with battery backup capability, provide continuous operation for up to 35 hours with just two 12VDC, 7 Amp Hour batteries.
Features
-
Stainless Steel Case
-
Epoxy filled for weather resistance
-
Threaded conduit fitting
-
Built-in voltage kickback protection
-
Low power consumption
-
Built-in bond sensor (BAS)
Specifications
Electrical Specifications
-
Holding Force 1200lbs
-
Voltage Input: 450mA @ 12VDC
-
225mA @ 24VDC
-
Bond Sensor
-
Output: 125mA @ 12/24VDC
-
Wire Leads: 24 AWG, 3ft. long
-
Conduit Fitting: 0.5'' Length, 0.75'' outside thread,
-
0.5'' inside thread
Mechanical Specifications
Field Install
-
Monitoring outputs
-
Timers
-
Top jamb “Z” kit
-
Glass door kits
Models
1510 Series - 1650 lb / 748 Kg Holding Force
1570 Series - 1200 lb / 544 Kg Holding Force
1580 Series - 650 lb / 295 Kg Holding Force
Details
